5000 Watt 24V Inverter
5000 Watt
24V Inverter
February 15, 2016
3000 Watt 24V Inverter Charger
3000 Watt
24V Inverter Charger
February 15, 2016
Show all
2000 Watt 24V Inverter Charger
2000 Watt 24V Inverter Charger
2000 Watt 24V Inverter Charger

2000 Watt
24V Inverter Charger

$608.00


2000W 24V Pure Sine Wave Inverter Charger

SKU: PICOGLF20W24V120VR. Category: .
Description

2000 Watt 24V Pure Sine Inverter Charger

Overview:

This 2000 watt 24 volt low frequency AIMS Power inverter charger is three products in one.

  1. An inverter that transforms DC (direct current) power stored by batteries into AC (alternating current) electricity that can be used to power tools and appliances of all varieties.
  2. A built-in 30 amp transfer switch, which will automatically detect when you’re switching from shore power to battery-bank power.
  3. A built-in 30 amp battery charger which uses AC power, like from the grid or from a fuel-powered generator, that can be used to recharge a battery bank as well. The battery-type selector on the top of the unit allows the ability to adjust the voltage provided to the bank.

Combine this inverter charger with a deep-cycle battery bank for off-grid, mobile and emergency backup power. This product is well suited for renewable solar, off-grid, mobile and emergency backup power applications anywhere that uses 110 or 120 volts of alternating current. This model also has auto frequency detection that allows users to operate at either 50 or 60 hertz and it boasts an average 10 millisecond transfer time with the built-in transfer switch. This is an awesome feature for use with backup power applications, as it makes the inverter a nearly uninterrupted power supply (UPS) when combined with a battery bank.

This inverter is also available in 12 and 48 volt models that are in stock and ready for same-day shipping.

This model is an industrial-grade unit with the ability to withstand surges of up to 6000 watts for 20 seconds, and it achieves this by virtue of its direct connect terminal block. This feature is one of the more sought-after in the inverter industry, allowing users to surpass the 1,500 watt maximum output of a GFCI outlet that would typically be seen on an inverter. This model also features a battery-type selector which supports user regulation of voltage going into the battery bank. This capability can be a big money-saver since treating the battery bank properly will maximize its lifespan.

Use this inverter to power tools on a work truck, as it will run most electric chainsaws, portable grinders, shop vacs, and more.  Or use it to power appliances in your RV, as it won’t produce any annoying noise or pollution.  As part of a solar solution – the unit will pay for itself in a short period of time. Simply compare the cost of running a gas generator with fuel, oil, & maintenance to the free power you’ll collect from the sun. When you do the math you’ll be amazed and wonder why everyone isn’t using this tech more!?

A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (when compared to modified sine units) produced during the DC-to-AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency. It also provides a quieter, nearly inaudible performance. The inverter also has conformal-coated (marine-coated) boards, making the product marine-grade and resistant to dust and/or water vapor that may travel through the air and could otherwise damage the unit. This feature is great for boating applications, like powering a stereo system, for instance.

As with all AIMS Power inverters, the PICOGLF30W24V120V is covered under a 30-day money back guarantee as well as a one year manufacturer’s warranty and free technical support.

 

Features:

  • 2000 watt low frequency inverter
  • 6000 watt surge for 20 seconds 300% surge capability
  • Battery Priority Selector
  • Terminal Block
  • Marine Coated and Protected
  • Multi Stage Smart charger 30 Amp
  • Remote panel available
  • Auto frequency
  • 10msec typical transfer time
  • Optional 25W power save mode
  • 7 battery type settings for charger

 

Inverter Output Specifications:

  • Continuous Output Power: 2000 Watts
  • Surge Rating: 6000 Watts (20 Seconds)
  • Output Waveform: Pure Sine/Same as input (Bypass Mode)
  • Nominal Efficiency: >88% (Peak)
  • Line Mode Efficiency: >95%
  • Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz
  • Typical Transfer Time: 10ms (Max)
  • THD: < 10% DC

Input Specifications:

  • Nominal Input Voltage: 24.0Vdc
  • Minimum Start Voltage: 20.0Vdc
  • Low Battery Alarm: 21.0Vdc-22.0Vdc
  • Low battery Trip: 20.0Vdc-21.0Vdc
  • High Voltage Alarm: 32.0Vdc
  • Low battery Voltage Restart: 31.0Vdc
  • Idle Consumption: <2.5 Amps DCC
  • Power Saver Mode Idle Consumption: <1 amps AC

Charger Specifications:

  • Output voltage: Depends on battery Type
  • Charger Rate: 30A
  • Over Charge Protection Shutdown 31.4V
  • Selectable Charge setting based on battery type
  • Adjustable charge current off-20%-100%
  • Four Stage Smart Charger

Transfer Switch Specifications:

  • 30 amp auotmatic transfer switch
  • 10 ms (max)

Dimensions:

  • Unit Weight: 41 lbs.
  • Unit Size: L17.40 x W8.59 x H7.05 inches
  • Shipping Weight: 47 lbs.
  • Shipping: L22.83 x W12.40 x H11.81 inches

pdficon_large    PICOGLF20W24V120VR Manual

Reference:

* Redirects to resources outside of Perigee Powers’ domain.

Share Button
Additional Information
Weight 47 lbs
Dimensions 23 x 13 x 12 in